Echo Error 12-1-107-22-1 is registration error, either the device you are trying to set up is reported lost or stolen to the Amazon server, either you are trying to set up a device with different Amazon account.
Call Toll-Free Numbers For Support
US: +1 (828) 490-7310
UK: +44-20-3375-8816
AUS: +61-2-4072-0594
What is the Echo Error Code 12-1-107-22-1?
This is an error concerning your device and only your device, no network problem or server availability here. Specifically, this error code means that your device has been reported lost or stolen from Amazon and cannot be configured. But do not panic, we will explain what to do.
Select the same amazon account from where you bought the device. Maybe the device is a gifted device or you are using a used 2nd hand device.
But this enclosure has not been stolen or lost!
Amazon uses this error code and the terms “lost or stolen” generically and it may be that in your case the device was not stolen. But technically the problem remains the same, the device has already been registered to someone else’s account and you cannot connect it to multiple Amazon accounts. This can happen if you have been offered the device by a relative who has already used it, or if you bought it used.
Call Toll-Free Numbers For Support
US: +1 (828) 490-7310
UK: +44-20-3375-8816
AUS: +61-2-4072-0594
The principle will be simple: unconfigure the device from the original Amazon account, and reset it (factory reset). It will then be possible to link it to your account again.
Step One: Unregister the Echo Enclosure from the Original Amazon Account
The previous owner (or the person who bought it) should go to his page “Manage your content and devices”, select the speaker in question and click on the link “Deregister “.
Once you click on the link, a message will appear asking for confirmation. Click again on “Unregister” to validate the action.
Step Two: Reset Your Echo Speaker
You must now find factory settings by resetting your device (factory reset). To do this several possibilities are depending on the model of the device.
How to make a factory reset on an Echo device?
Call Toll-Free Numbers For Support
US: +1 (828) 490-7310
UK: +44-20-3375-8816
AUS: +61-2-4072-0594
- Reset a 3rd generation Echo Dot
- Hold the Action button (the one with a stitch) pressed for 25 seconds
- Reset a second-generation Echo Dot
- Press and hold the Micro Off and Volume Down buttons for about 20 seconds until the ring turns orange. This action allows you to restart the configuration phase as well.
Reset an Echo Plus
Hold down the Micro off (left) and Volume down (down) buttons for about 20 seconds until the light ring turns off and on again.
Reset an Echo
Hold down the Micro Off and Volume Down buttons for about 20 seconds until the light ring turns on and turns orange.
Reset a Sub Echo
Hold the Action button (with a dot) for about 25 seconds.
If your speaker has a screen
Call Toll-Free Numbers For Support
US: +1 (828) 490-7310
UK: +44-20-3375-8816
AUS: +61-2-4072-0594
With your finger, start from the top of the screen and swipe down to open the setup menu, or just say “Alexa, access to settings”. Choose “Settings” and then “Device Options”. Then click on “Restore factory settings”. Visit us at helptechline.com
For more information and help you can contact Echo Dot Support.
